CFMOTO 450MT G2 THROTTLE TAMER – PREMIUM USA-MADE ALUMINIUM THROTTLE TUBE
SMOOTHER THROTTLE RESPONSE | PREMIUM ENGINEERING | GENUINE G2 QUALITY
Tired of the jerky, snatchy throttle response on your CFMOTO 450MT?
The G2 Throttle Tamer is a premium, precision-engineered throttle tube manufactured in the USA by G2 Ergonomics.
Designed to help reduce the well-known jerky throttle characteristics of the CFMOTO 450MT, this upgrade provides smoother initial throttle control, particularly during low-speed riding, technical off-road conditions and stop-start traffic.
Unlike the standard factory throttle tube, the G2 features a specially designed progressive throttle cam that slows down the initial throttle opening rate, giving the rider greater control over small throttle movements.
As the throttle continues to open, the progressive cam maintains access to the full throttle range.
GENUINE G2 ERGONOMICS – MADE IN THE USA
Premium American engineering. Quality without compromise.
Manufactured by G2 Ergonomics, a highly respected American manufacturer specialising in precision-engineered motorcycle throttle control components.
This is not a cheap, generic AliExpress throttle tube or an unbranded imitation.
At SSS MOTORCYCLES, we take the quality of motorcycle control components extremely seriously.
A throttle is a critical control mechanism, and we would never knowingly supply an inferior, poorly engineered or unsuitable product for this application.
We believe in supplying premium, purpose-designed components from reputable manufacturers.
PREMIUM FEATURES
- Genuine G2 Ergonomics product – Manufactured in the USA.
- Precision-machined aluminium – Beautifully finished for strength, durability and accurate fitment.
- Internal nylon bushes – Designed to minimise friction and provide an exceptionally smooth throttle feel.
- Progressive throttle cam – Slows the initial throttle opening rate for improved control.
- Reduced throttle snatch – Helps smooth abrupt initial throttle inputs.
- Direct factory fitment – Fits the original CFMOTO 450MT handlebars and factory handguard arrangement.
- Improved low-speed control – Particularly beneficial during technical off-road riding.
- Full throttle operation retained – Progressive action without sacrificing maximum throttle opening.
---
IMPORTANT – ONLY ONE PART OF THE SOLUTION
The G2 Throttle Tamer is only one step towards reducing the known jerky throttle characteristics of the CFMOTO 450MT.
While the progressive throttle cam improves mechanical throttle control, it does not change the underlying ECU calibration characteristics that can contribute to abrupt throttle response.
For the best overall results, we strongly recommend combining the G2 Throttle Tamer with our SSS ECU Reflash.
The ECU reflash addresses engine management calibration characteristics contributing to throttle jerkiness, while the G2 Throttle Tamer provides additional mechanical control over the initial throttle opening.
Together, these modifications offer a more comprehensive approach to improving throttle smoothness, control and overall rideability.
Neither modification should be considered a guaranteed complete elimination of throttle jerkiness.
---
DIRECT FITMENT – ORIGINAL HANDLEBARS & HANDGUARDS
No handlebar replacement or factory handguard modifications required.
The G2 Throttle Tamer fits perfectly with the original CFMOTO 450MT handlebars and factory handguard arrangement.
The throttle tube integrates with the existing factory setup when installed with the appropriate replacement hand grips.
---
IMPORTANT – REPLACEMENT HAND GRIPS REQUIRED
Replacement hand grips must be purchased separately to complete this installation.
We recommend using Motion Pro replacement hand grips, available through a separate listing on our website.
Clutch-Side Grip Installation
The original CFMOTO 450MT clutch-side grip uses a larger outside diameter mounting arrangement and is mechanically secured using a screwed, bolted and keyed system.
The recommended Motion Pro grips use a conventional friction-fit arrangement directly onto the handlebar and are secured using suitable hand grip adhesive.
This is an important distinction because the original CFMOTO grip mounting arrangement differs from conventional motorcycle hand grips.
The original factory grips are not suitable for reuse with this throttle tube.
Please ensure you purchase the appropriate Motion Pro replacement grips separately.
---
RECOMMENDED CFMOTO 450MT THROTTLE UPGRADES
For the most comprehensive improvement in throttle control and overall rideability, we recommend combining the following products:
1. G2 THROTTLE TAMER
Premium USA-made progressive throttle tube designed to improve mechanical throttle progression and initial throttle control.
2. SSS ECU REFLASH
Our specialised ECU calibration designed to improve throttle response, reduce abrupt power delivery and enhance overall engine rideability.
3. MOTION PRO HAND GRIPS
Recommended replacement grips required for installation of the G2 Throttle Tamer.
Please note that the ECU reflash and replacement hand grips are sold separately.
---
WHY BUY FROM SSS MOTORCYCLES?
We specialise in motorcycle ECU calibration, custom dyno tuning and performance upgrades.
Our approach is to supply quality components that complement our engine management development and improve the overall riding experience.
We don't believe in compromising on critical motorcycle control components simply to achieve a cheaper selling price.
When it comes to throttle control, quality engineering, correct fitment and reliable operation are essential.
GENUINE G2 ERGONOMICS | MADE IN THE USA | PREMIUM ALUMINIUM CONSTRUCTION | CFMOTO 450MT DIRECT FITMENT
SSS MOTORCYCLES – TAMWORTH, NSW, AUSTRALIA
Motorcycle ECU calibration, dyno tuning and premium performance upgrades.