This kit adds much needed electronic cruise control to the do it all 690 SMC and Enduro bikes. This kit requires no splicing or cutting, just plug in and cruise. Works like it does in your car.
Triple Button Switch
A 3 button switch for controlling the cruise functions is included. Fully watertight and durable. Mounts directly to standard 22mm handlebars with a fully opening bracket. This option provides 3 buttons.
- Resume / Increase
- Cancel
- SET/ Decrease
LED lights and other upgrade compatibility
This kit is 100% compatible with any aftermarket lights and kits. No wire splicing or messing with brake wires.
Cruise Stop Conditions
We know it’s paramount on motorbikes to quickly kill the cruise control in as many situations as possible. Our module will disengage cruise control for any one of the following conditions:
Engine RPM rises above 8000
Front Brake Depressed*
Clutch lever is pulled
Bike transmission is in first gear or neutral
Any one of the required CANBUS packets are not updated within 1000 milliseconds
A difference of 10% between the front and rear wheel speeds
*Rear Brake only supported with optional wire tap
Configuration
The module has a weather tight USB-C connector for changing various settings such as speed increment size, PID gain, and throttle limits.
Diagnostic Port / Offroad Module
This kit uses the diagnostic port of your bike. If you want a second port for OBD and Off Road dongles see addon below. Also see our offroad software addon which can also enable the offroad mode without the purchase of a seperate dongle.
Installation pdf
https://drive.google.com/drive/folders/1eYlyuvXGpJdHDdBpmClbdt_BjADtuptU?usp=sharing